Hello
I’ve seen many videos and posts that mentions the usage of Proxmox in their homelab setup, and I’ve been wanting to try it.
I have two servers running at my homelab: an OrangePi 5 for HA AdGuard, Omada Controller, HomeAssistant; a Dell Inspiron 3268 repurposed as a server. The latter is which I’m considering Promox.
What is the server config?
- Dell Inspiron 3268 desktop, Core i3-7100 with 16GB DDR 4.
- 3 SATA drives: 250gb Crucial MX500, system and 2 Kingspec P3-1TB in a ZFS pool, used for backup.
- PCIe to M2 adapter with a KingSpec NX-2TB drive also in a ZFS pool.
- 1 Gigabit ethernet (motherboard0 and 1 2.5Ge ethernet connected to PCIe v1
What is the server currently run and what is used for? (see outputs below)
- Primarily it’s a NAS / Media server
- Ubuntu server 23.10
- Samba server
- lighttpd (reverse proxy for ALL the containers except for Plex and flaresolverr)
- xrdp with XFCE desktop environment (server is headless)
- Docker container running both OpenVPN client and Deluge for privacy
- Plex (docker)
- Flaresolverr/ jackett (docker)
- Radarr / sonarr / bazarr (docker)
- Portainer to manage containers (docker)
Why I’m considering Proxmox :
- Bare metal restart for kernel updates
- Lack of a web monitoring tool for the server that is not a lot of overheard
- From time to time, I like to explore other distros or new appliances and can’t
- You tell me… there may be benefits I’m missing…
I did install Proxmox but think I used it wrong or was unable to realize all the benefits:
- My media is on data-pool/media dataset but I was unable to share that with multiple LXC
- All my docker configs are mapped as volumes on the host, and are stored on data-pools/apps. I would like to reuse them
- I was not sure if I should run a LXC container for each docker, or have a single LXC with everything (exception xrdp / XFCE). I don’t know what would be good practices…
- On networking, I wanted to ensure I can map a NIC just to a specific hardware… but had challenges figuring out how to have a NAT like environment
- I was planning to have a Windows VM that I can start on demand to use, but stopped on the challenges above
Given my opportunities and challenges, what you would all suggest for me? Keep running on baremetal as is or change to Proxmox?
me@jupiter:~$ lsblk -o MODEL,SERIAL,SIZE,STATE --nodeps
MODEL SERIAL SIZE STATE
73.9M
152.1M
40.9M
CT250MX500SSD1 2219E6302473 232.9G running
P3-1TB 0010159006480 953.9G running
P3-1TB 0010159006489 953.9G running
NX-2TB 2280 0010174003295 1.9T live
me@jupiter:~$ zfs list
NAME USED AVAIL REFER MOUNTPOINT
backup-pool 291G 631G 26K /backup-pool
backup-pool/computers 121G 631G 121G /backup-pool/computers
backup-pool/documents 24K 631G 24K /backup-pool/documents
backup-pool/photos 166G 631G 166G /backup-pool/photos
backup-pool/servers 4.36G 631G 4.36G /backup-pool/servers
data-pool 520G 1.29T 26K /data-pool
data-pool/apps 6.90G 1.29T 6.90G /data-pool/apps
data-pool/home 27.6G 1.29T 27.6G /home
data-pool/media 486G 1.29T 486G /data-pool/media
me@jupiter:~$ docker ps --format "table {{.ID}}\t{{.Image}}\t{{.Size}}"
CONTAINER ID IMAGE SIZE
46ffbe41beee ghcr.io/flaresolverr/flaresolverr:latest 16.1MB (virtual 618MB)
9c6eb995b729 lscr.io/linuxserver/jackett:latest 106MB (virtual 277MB)
ffe5ccd4aae1 portainer/portainer-ce:latest 0B (virtual 294MB)
b28afe33a106 lscr.io/linuxserver/radarr:latest 23.6kB (virtual 196MB)
0f7744daf9d6 lscr.io/linuxserver/sonarr:latest 35.6MB (virtual 335MB)
574c625933b1 binhex/arch-delugevpn:latest 16.5MB (virtual 1.29GB)
8a7f84e40f84 lscr.io/linuxserver/plex:latest 24.3kB (virtual 340MB)
37e8580600ef lscr.io/linuxserver/bazarr:latest 23.2kB (virtual 422MB)
Picture of the rack… very cheap 8U rack, depth is just 350mm in depth. GPON and ER-605 at the top. Unloaded patch panel, TL-SG2210MP switch, orange pi 5, Dell server
