My system is Arch . I have a problem with:

Root@archiso ~ # [ 1324.8567321 ata5: softreset falled (deuice not ready) I 1331.876573) atas: softreset falled (device not ready) 1 1445.3900501 atas: Illegal qe active transItion (00000000-200000001) [ 1451.1733021 ata5: Illegal qc/active transition (00000000-300000001) [ 1523.0066961 ata5: 11legal qc_actlue transItion (00000000->00000001) [ 1561 .5133411 ataS: softreset failed (device not ready) ( 1591.9133513 ata5: Illegal qc_active transition (00000000->00000001) [ 1601.9366601 ata5: softreset failed (device not ready) [ 1619.750020] ataS: softreset falled (device not ready? [ 1901.9165911 ata5: softreset falled (device not ready) [ 1911.9632591 ata5: softreset falled (device not ready) [1916.9999571 ata5: softreset failed (device not ready) [ 1952.1732931 ata5: softreset failed (device not ready) [ 1952.1733501 atas: reset failed, gluing up [ 1962.1932521 ataS: softreset falled (device not ready) [ 1972.2132911 ata5: softreset falled (device not ready) [ 2007.2232361 ata5: softreset failed (device not ready) [ 2012.4265781 ateS: softreset falled (device not ready) I 2012.4266381 ata5: reset failed, giving up

My computer components : Custom Built Gaming PC with RGB

/Ryzen 5 1600/ 1TB

SSD/16GB DDR4 Ram/

AMD RX570

Does anyone know how to solve this problem?

Thank you in advance for your help.

  • frugallylivingOPBEnglish
    1·
    1 year ago

    Good morning, and thank you for responding. I appreciate you taking the time to respond to my question. Do you recommend that I replace the hard drive and then run computer diagnostics?

    In addition, I will most likely perform S.M.A.R.T. • Perform an S.M.A.R.T. test on my SSD to rule out any potential hardware concerns. To accomplish this, I can use the smartctl command:

    smartctl /dev/sda -a

    If it doesn’t work, I’ll try Kernel Modules:•It’s possible that the problem is caused by a kernel module connected to my storage devices. I can try reloading these modules with the command:

    -r modprobe [module_name] [module_name] modprobe

    However, I’m not sure how to discover the module name; could you point me in the appropriate direction?

    I hope to hear from you soon. thank you!