I’m guessing I set the relay as an edge switch so any press of the switch will turn it on or off. I see there is “fade rate” which as you stated indicates controls the dimming when the button is held. However what I don’t see is the ability to set it so if you hold the button an “up” position it brightens or if its held in a “down” position it dims.
Unfortunately if I cant replicate that behavior with the switch I wont pass the “wife acceptance test” which means no smart lights.
Yeah so looking at the user guide for dimmer 2
https://kb.shelly.cloud/__attachments/63897613/User%20&%20Application%20Guide?inst-v=dd456c15-eb79-423d-82f6-ed9064a7cc66
I’m guessing I set the relay as an edge switch so any press of the switch will turn it on or off. I see there is “fade rate” which as you stated indicates controls the dimming when the button is held. However what I don’t see is the ability to set it so if you hold the button an “up” position it brightens or if its held in a “down” position it dims.
Unfortunately if I cant replicate that behavior with the switch I wont pass the “wife acceptance test” which means no smart lights.