I have a Lexus RX 350 2009 with 190,000 miles.
My father (mechanic) and I recently replace the control arm (lower) and rack and pinion about 1.5 months ago. I just notice that when going 60+ on a curve to the RIGHT ONLY the front end shakes. I looked at all the boot for the rack and pinion to make sure there was no leak, and the control arm is good. Any idea?
Next step would be check the tie rod and ball joint.
I checked the bearing, it was okay, not good but ok…
I did get a new left front driver side tire, could be balancing issue. What making me not think that is the vibration/shaking only occur when I do a curve to the right at 60+