So, I’ve got one of those “glass touch” (from Livolo) wall switches (kitchen, so actually does make cleaning easy). But I’ve some trouble wiring it into a Shelly 1PM Mini.
The wall switch has no neutral, and since it has electronics, it needs power always. So I thought that perhaps I could wire in one of those so-called “bypasses”. I’ve got one from Livolo, which contains a MOSFET and some electronics. And I got the Shelly bypass, which contains some, to me unidentifyible, electronics as well. But no luck.
This is the situation:
Wiring in the Livolo bypass between SW and N, does power the switch all continuously, but the Shelly doesn’t respond to it being switched ON/OFF (yes, the shelly is in “normal switch mode”).
Also tried wiring the Shelly bypass between SW and N and O and N. Neither power the Livolo, and neither do anything.
Any advice for me?
Crap. I mixed up the “L” and “N” in my diagram. It’s wired correctly though. L/brown, N/blue. Is this what you mean? This I already tried, and did not work.
https://preview.redd.it/0cxbuu2s6xxb1.png?width=695&format=png&auto=webp&s=c74bbbd325e5daf4a110df8dec09defc8c1c21df