I was given 4 servers from my company recently. All dell poweredge servers. I am trying to set up my r620…
Firstly I did not want to use RAID at all so I flashed the RAID controller. I flashed it using this guide: https://fohdeesha.com/docs/perc.html and it went fine.
Something I noticed though is that, raid has to be enabled in the BIOS still, even tho we flashed the controller to allow IT mode. If I disable RAID from the BIOS, my live installer doesn’t see any of my HDD’s. So I left it enabled, but I don’t have any RAID configs setup (cleared them from the menu from pressing ctrl+R during boot)
So I try to install my OS (booting from usb) and i remove all the drives from the bays except one.
The OS seems to install perfectly fine. I get zero issues. The imagine below is what happens when I try to boot after installing the OS. I have tried VOID Linux and Debian. Both do the same thing. I am booting in UEFI mode. Please help, any support is appreciated.
I tried 3 different hard drives…
I mean…is it even necessary to flash the RAID controller? Is using RAID 0 on each drive separately any different…I should mention I do plan to experiemnt w/ ZFS (which is why i want raid disabled cause zfs has raidz built in)