I have no idea how, was looking at some guides, but every setting i adjust, boom bluescreen. The NH-d15 is handling 230 watts like the champ it is (60⁰C above ambient), but still I kind of wanted a bit more efficiency. Is there some settings, that are not that hard to fiddle with that could give me a decent drop in watts without impacting performance? My motherboard is the Asrock Z790 taichi lite, and running 7200mhz ram
You must log in or register to comment.
Correction: I did set the voltage offset to -100mV, which reduced power consumption by 5 watts
limit the pl1 and pl2 to 200w or even 180. thank me later
Yeah that wasn’t my experience, and I have a b760 board and shouldn’t even be able to undervolt (gigabyte had a workaround for me.)
Anyway, it just kept on going. 150 200 250 didn’t bluescreen until 300mv. Just luck of the draw I guess. If that doesn’t work… you just have the power limits (pl1 and pl2). That or send it back and try to get a replacement.Here is my setting OC with undervolt for 13700KF (Gigabyte Z790 Aorus Elite AX DDR5):
CPU UPGRADE: Max Performance (P-Core: 54 & E-Core: 44
Enhanced Multi-Core Performance : Disable
Dynamic V-Core (DVID): -0.050
TDP: P1 (125w) & P2 (253w)