Given how useful u/ryanrudolf 's refresh rate unlocker is on the LCD steam deck [allowing 30-70hz refresh rates on most LCD decks] and that I seem to have received an OLED steam deck before they did, I figured I would do a bit of display testing to see how far the OLED panel in my unit can be pushed. Here are my results:

Maximum timings (pclk method): 147.223 800 818 822 858 1280 1288 1290 1320 +HSync +VSync

Minimum timings (pclk method): 56.628 800 818 822 858 1280 1288 1290 1320 +HSync +VSync

Minimum timings (vblank from max pclk): 147.223 800 818 822 858 1280 1288 1290 5320 +HSync +VSync

Minimum timings (vblank from stock pclk): 102 800 818 822 858 1280 1288 1290 5320 +HSync +VSync

Maximum refresh rate (pclk): ~130hz

Minimum refresh rate (pclk): ~50hz

Minimum refresh rate (vblank from max pclk): ~32hz

Minimum refresh rate (vblank from stock pclk): ~22hz

VRR: Untested, but given vblank results, may be possible to force enable using an EDID override

Colours/gamma curves/brightness appear directly related to pixel clock / refresh rate, higher rates appear washed out, lower ones appear too dark.

Like with LCD models, flickering appears at low refresh rates

While I did not notice any negative side effects during or after my testing, operating electronics outside of their rated parameters may reduce lifespan or cause damage to said device, if anyone wants to test further, you do so at your own risk.

I may test if VRR works myself eventually if nobody else does so over these next coming days/weeks.