Given how useful u/ryanrudolf 's refresh rate unlocker is on the LCD steam deck [allowing 30-70hz refresh rates on most LCD decks] and that I seem to have received an OLED steam deck before they did, I figured I would do a bit of display testing to see how far the OLED panel in my unit can be pushed. Here are my results:

Maximum timings (pclk method): 147.223 800 818 822 858 1280 1288 1290 1320 +HSync +VSync

Minimum timings (pclk method): 56.628 800 818 822 858 1280 1288 1290 1320 +HSync +VSync

Minimum timings (vblank from max pclk): 147.223 800 818 822 858 1280 1288 1290 5320 +HSync +VSync

Minimum timings (vblank from stock pclk): 102 800 818 822 858 1280 1288 1290 5320 +HSync +VSync

Maximum refresh rate (pclk): ~130hz

Minimum refresh rate (pclk): ~50hz

Minimum refresh rate (vblank from max pclk): ~32hz

Minimum refresh rate (vblank from stock pclk): ~22hz

VRR: Untested, but given vblank results, may be possible to force enable using an EDID override

Colours/gamma curves/brightness appear directly related to pixel clock / refresh rate, higher rates appear washed out, lower ones appear too dark.

Like with LCD models, flickering appears at low refresh rates

While I did not notice any negative side effects during or after my testing, operating electronics outside of their rated parameters may reduce lifespan or cause damage to said device, if anyone wants to test further, you do so at your own risk.

I may test if VRR works myself eventually if nobody else does so over these next coming days/weeks.

  • z10mB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    My 512 OLED is on the way and I will happily help testing this. Thanks to this sub I increased refresh rate on my LCD deck yesterday to 70hz. Keep up the good work guys. Many thanks for all the effort to make this device even better.

  • laytonoidB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    Why doesn’t have VRR? AMD freesync should work… why didn’t valve implement this?

  • Mast3rBait3rProB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    How do you overclock a screen? I’d be interested to see if I can overclock my old gaming laptop to above 60hz

  • RathalotB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    Did you test the 90+ Hz modes for frameskipping?

    If you get any frame skipping, then display overclocking is useless.

  • ChillCaptainB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    Has there been no one to test out the Samsung panel?

  • NKkriszB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    I really hope the second Deck will have VRR and OLED at launch, would be so cool.

  • PrayForTheGoodiesB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    Even if the panel itself can run with VRR, that would not be really possible because the steam deck uses a MIDI interface to communicate with the screen

    • NyaaoriOPB
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      VRR does not do anything special that has not been possible since the 1980s if not earlier, if a display signal can be fed over a line than that signal can be made VRR too. What would be difficult is coaxing a GPU/Driver to generate that signal to feed to said display.

  • WhhheatB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    This is extremely promising, I believe I’ve got a Samsung panel, but I’d be worried about hurting my baby. Also, if you can, see if you can get Windows to recognize the Deck as HDR. Apparently that’s “impossible” but so was VRR, and now that’s a possibility.