Plugged in my formatted USB C drive and nothing happens.

Is there anything special I need to do for SD to recognize the USB C drive. It is a simple stick drive, no other power source required.

  • Koadic76BEnglish
    1·
    10 months ago

    This is a known issue with the USB port on the OLED deck.

    There is a workaround for this issue where you can boot into the bios, and in the Advanced>USB Configuration screen, change the USB Dual Role Device setting from DRD to XHCI. If you’re unfamiliar with entering the bios, shut down your deck, hold the Volume+ button and then turn on the deck. You can release the Volume button after you hear the beep

    Video walking you through the process: https://youtu.be/guoen-rRMo8

    • ardeesanBEnglish
      1·
      10 months ago

      Thanks for this. Time to place back my USB A adapter to the vault. 😆

  • ardeesanBEnglish
    1·
    10 months ago

    The same thing happened to my USB C drive. It doesn’t get read when it’s plugged directly to the USB C port of the deck. Made it readable by using the official dock and plugging the thumb drive with a USB A adapter to one of the dock’s ports.