Again,

Ha! Welcome to corporate

There is a catchphrase in corporate - “Minimum viable product” and it means just that, memory leaks and all.

Change your thought patterns. Minimise their actions in your mind.

They are not “psychopaths”, they are just “idiots”.

They do not “counterattack”, there is no “attack” from your side. They are just “being a nuisance”. Frame all the bumps and thumps as renovations if you want.

When they make a noise, turn UP your tv, just a little, so you can hear it over it. “Gee those renovations of theirs are a bit noisy, maybe I should put in a complaint.”

When they rattle the ceiling of their apartment, “Hey it must be time to vacuum, thanks for reminding me. I’ll do it now while you’re renovating and making noise so it doesn’t disturb you too much”.

“I hear that plants respond to music so I’m just going to leave some on for Ferris, my pot plant, while I go out shopping for a few hours this morning” - Not too loud, just loud enough for Ferris to enjoy it. If you hear a lot of thumping it must be just them taking the opportunity to renovate while you can’t hear them. I do hope they don’t damage their ceiling with all that thumping while you’re out, oh well.

All that activity on their part takes a lot of energy, your activities take very little. Which one do you think is going to end first?

If it seems stupid, that just means that it was cheaper to do it this way.

Program ROM/EEPROM + RAM, or just RAM connected to a USB interface with a reset line tied to the camera processor? See the USB device ID connect , fill the ram with the camera software, toggle processor reset , off you go.

It’s only a matter of time before Google borks the fine grained notification system in Android in the quest to serve you more ads information to enhance your life.

Apps get one chance with me. As soon as I get an unsolicited notification begging me to interact with them, that’s it, 100 percent silenced.

It’s difficult on the back end of the charger as well.

A shopping centre or rest stop can’t just spring for a few high capacity chargers for the car park. A single megawatt charger is 50 houses worth of consumption, so they now need a substation upgrade to provide what is basically a whole neighbourhood-equivalent of power.

You’ve got it all wrong, in traditional computer terminology the “hard drive” is the box that sits under the desk that collects cat fluff and cigarette tar.

/s …?

They aim to actively deorbit starlink sats.

(Edit: they keep a small amount of propellant in reserve for the initial deorbit burn, and then position the solar array to give maximum drag which hastens things considerably)

As far as I know, apart from the first few batches, the “production run” of sats has a pretty low failure rate and are proactively sent to their demise.

Older engines had them in their timing gears - they were in 6 cylinder Holdens, for example.

They give an amount of cushioning/vibration dampening that you can’t get with steel gear sets.

rustfmt

is stopping me from writing code like this, and I have never been more happier using it after viewing this.

People don’t just leave leaking apps out there for consumption.

Ha! Welcome to corporate, where vendors sell you software and say that the hardware has to have 128GB of ram and when you poke around a bit you discover a single JVM with constantly growing memory usage with a script that restarts it every time it runs out of resources.

AND a log file that describes - in typical Java excruciating detail - the precise lines in each module where the devs allocated resources but didn’t free them. About 40 times a second.

I loaded the video, paused, jump jump jump jump jumped through the timeline looking at the thumbnail images, about 5 seconds of actual playback while I watched them mess it up, more minor adjustments in the timeline, paused for 15 seconds at the thing I actually wanted, closed the video.

Good luck getting any kind of decent metrics out of that.

I can skim documents at 800 words a minute, they are mostly nicely arranged and indexed/sectioned. Compare that to videos where half the words are “um, so”, and it’s no wonder I prefer text.

Lol between the top paragraph and the bottom one the number of partners increased by 23. I wonder how many partners they have now?

Today I had the pleasure of trying to search for how to shift a chartjs array and finally had to try and watch a “tutorial video” where they allegedly discussed it.

Cut to me clicking around just trying to find the screenshot where they are actually doing the thing that I want to do, and then they proceed to fuck up its usage three times with much scrolling back and forth through their example code that they didn’t show in full anywhere and rapidly clicking between windows while they got their shit together.

I just wanted to see like, three lines of code.

Maybe I should have just asked chatgpt.

Motor oil tastes funny.

It’s pretty simple:

• USA and Russia have public talks and say they have a “good solution”.
• Ukraine says ,“We are not interested in a solution negotiated by a third party and the aggressor in this conflict”
• USA says “oh look Ukraine isn’t coming to the party here these negotiations were in good faith we can’t believe how they’re acting we are withdrawing support.”
• Ukraine gets stomped on, USA and Russia divvy up the spoils of war.

Lots of expensive industrial equipment runs these kinds of processors still. You can still buy motherboards with 8 bit ISA slots even, although you’ll pay quite a premium.

But all of that kind of gear typically runs its own distro with an in-house build system. For example, my work uses a flavour of Buildroot for their embedded Linux systems and you can just set whatever processor type you like all the way back to plain old i386 when you build it.

It’s only one wire in the cable, and it’s not the wire, but it looks like the pin, or possibly the crimp point on the female pin.

So a few possibilities:

• Bad pins. Female pins (sockets) have internal wipers that grip the male pin and there is also the crimp connection. Bad QA on those leads to hotspots in the pin under high current draw. I’d probably go for this explanation, looking at the photos.

• Bad electrical layout on the card that means that the bulk of the current goes through this pin. Milliohms on the track traces are enough to cause imbalances. This might be balanced out by having a small-but-still-larger resistance in the (standard) cable, which leads to:

• It looks like thicker cabling is soldered and heatshrinked to smaller cabling that actually goes into the pins in the connector. There’s a reason why industrial cable connections aren’t soldered. Possibly a solder connection on another cable has broken and hidden in the hearshrink leaving more current to pass through this one.

• Following from this it’s also quite possible that the thicker cable with less resistance , now has less voltage drop across it, and simply allows more current then designed through a connection already at its limit.

• It’s quite possible that there are different pins/connector sets for different current draws. This cable might be using the wrong connector with the same physical size but lower current rating. The fact that the cable has been soldered to skinnier wires in the actual connector suggests this, but it’s quite possible that the connector is the right one.

Bastard user from hell

Every IT/software group needs to have one, otherwise you get complacent.

Yeah it’s steadily getting enshittified.

I used to have a mythtv box that I’d built , like, 15 years ago and it was pretty good. For a while there TV UIs were adequate enough that I didn’t need it, but it seems that maybe it’s time to build another one.

TVs that do anything more than displaying a signal exactly as it’s input shouldn’t exist.

Some of that input could do with a bit of tweaking though.

I wouldn’t mind if the TV was able to do things with the audio track, like remove background music, or lift the volume of people speaking, or erase laugh tracks/live audience hooting& hollering.

There’s probably similar manipulation that you could do on the video side (eventually, once TVs stop getting the worst processors ever, not here and now). Imagine a prompt that says “Airbrush every recognisable brand name on-screen so that it blends with the background”.

I seriously doubt if any major manufacturer would do that kind of thing though, so better get working on jailbreaking those TVs.