So, I’ve seen a lot of post about new or existing deck (mostly new) not powering on or charging. The solution that works most of the time is a cmos reset. This resets the bios to stock configuration and can fix decks that wont power on.

Here is how to do it

Make sure the deck is fully off (no lights/fan noise)

Press and hold vol down + three dots button and turn it on

Keep holding the vol down + three dots button for about a minute. The charging LED should start flashing

Wait for a few minutes and, hopefully, the deck will boot right up

Happy gaming!

  • lavachequifrouteB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Mine was flashing then the fan was spinning full speed for a seconds and now the led is steady but no sign of life …