I have an old 90’s indy snowmobile. The carb boots are trashed and I can’t find the proper size to replace them. I have the tools and knowledge do build a work around but not the experience to know if it will work well. My plan is to make an intake manifold out of some stainless plate I have and weld the runners to that, then use straight fuel safe hose to connect it to the carbs. Probably use some cork to make a gasket to seal it, if that fails I’m thinking rtv. It’s a junk sled but it ran great until the old rubber boots gave out. Would this, in your opinion, work to revive my sled?
You must log in or register to comment.