Hello everyone,

I’ve been wondering, why has no one built an entirely free (as in freedom) computer yet? For humans to be unable to share each other’s knowledge to build one of the most important technologies ever created for society, how is it that we have yet to have full knowledge about how our systems operate?

I get that companies are basically the ones to blame, and I know there are alternatives like the Talos II by Raptor Computing, but still, how do we not have publicly available full schematics for just one modern computer? I’m talking down to firmware-level stuff like proprietary ECs, microcode, hard drive/SSD firmware, network controllers, etc. How do we not have a fully open system yet?

  • half_built_pyramids@lemmy.world
    link
    fedilink
    arrow-up
    92
    ·
    9 months ago

    Also on top of what other folks are saying, making a complete modern computer is really fucking hard.

    No one is making a 3ghz CPU in their garage. Maybe folks are assembling stm32, or pis, or whatever into their own pcbs, but the machines that make the chips just aren’t hobby level yet. You just have to buy some stuff.

    Maybe that’s not your point. Maybe you’re okay with the processor being closed because it is fucking hard to make.

    Beyond the hardware now we’re talking making your own drivers and shit. There are resources out there like zephyr, but there’s millions of devices that aren’t covered.

    Try writing your own SPI interface for an established MCU and a common periferal. Make sure you include crc, don’t skip it. Maybe skimp and do i2c. It’s fucking hard.

    • Zeon@lemmy.worldOP
      link
      fedilink
      arrow-up
      10
      arrow-down
      2
      ·
      9 months ago

      Absolutely, creating a complete modern computer is an incredibly complex task. Building a 3GHz CPU from scratch is a monumental challenge, and even assembling components like stm32 or Pis requires a level of expertise. Developing your own drivers, dealing with various peripherals, and ensuring compatibility is tough shit.

      However, once the software is written and released under a Free Software license, it will be there forever. As you’ve already stated, it’s hard, but not impossible. I share your hope that one day we will reach the point where such endeavors become more feasible.

      • pearsaltchocolatebar@discuss.online
        link
        fedilink
        arrow-up
        18
        arrow-down
        4
        ·
        9 months ago

        Linux exists, so I’m not sure what more you’re asking for at a software level.

        You’re never going to get open source computer hardware. The machines that make the chips cost many, many millions of dollars.

        • astraeus@programming.dev
          link
          fedilink
          arrow-up
          16
          arrow-down
          1
          ·
          edit-2
          9 months ago

          Never say never. The phones in our hands are orders of magnitudes more powerful than the computer that took people into space and enabled landing on the moon. Eventually even today’s technology will be obsolete and potentially even easy to replicate in a garage. 2nm processes may be difficult, but 40nm process is certainly not impossible for hobbyists of the future.

          Edit: An article about a tinkerer currently using older tech to make semiconductors in his parents’ garage.

          • wahming@monyet.cc
            link
            fedilink
            English
            arrow-up
            9
            arrow-down
            2
            ·
            9 months ago

            Yes, but nobody wants to use technology 10 generations out of date. We could potentially build open, free computers on a level with those used to develop the atom bomb, but who would use them when the commercial alternatives cost pennies?

            • astraeus@programming.dev
              link
              fedilink
              arrow-up
              4
              arrow-down
              1
              ·
              9 months ago

              This is the same argument you could use against any open-source projects. Software is much easier to open-source because the tools needed and barrier to entry are relatively minuscule. Hardware requires a lot of resources that take time and money to acquire. TSMC is fifty years ahead because they have had billions in research funds and have acquired the brightest minds of the past few generations, this still doesn’t mean that the technology of today is limited to highly advanced fabs the same way fifty years from now. Arguably all it takes is a dedicated team of highly-skilled hobbyists to make leaps toward open-source hardware more suitable for today’s requirements.

              OP said hobbyists will never be able to make open-source hardware close to today’s scale, but it’s entirely possible for future generations to do just that.

                • astraeus@programming.dev
                  link
                  fedilink
                  arrow-up
                  4
                  arrow-down
                  1
                  ·
                  edit-2
                  9 months ago

                  The fabs broke sub-micron well over 30 years ago, the biggest reason it won’t happen sooner in the public space is because most assume making it open-source is impossible. Technology hasn’t progressed because people said X (variable, not the social formerly known as Twitter) was impossible, it progressed because of the people who questioned that assumption.

          • half_built_pyramids@lemmy.world
            link
            fedilink
            arrow-up
            6
            arrow-down
            2
            ·
            9 months ago

            Just to be clear how far behind the “hobby” microchip scene is, not to take anything away from the accomplishment, but the chip he made can’t do 1 + 1 yet. Don’t get the wrong idea from only reading the article title. No one is making pi chips in their garage.

            • astraeus@programming.dev
              link
              fedilink
              arrow-up
              4
              arrow-down
              2
              ·
              9 months ago

              No one claimed they’re making pi chips in their garage, it’s a modest start towards open-source hardware. One guy in a garage doing what thousands of skilled engineers and scientists devoted careers to make in expensive labs.

          • LarmyOfLone@lemm.ee
            link
            fedilink
            arrow-up
            2
            ·
            9 months ago

            Wow that is amazing. Even just a simple microcontroller chip that can be homebrewed would be amazing. Without being dependent on a global and somewhat fragile industrial economy. Something that allows you to program a 3D printer or CNC mill or use kites to generate electricity.

          • bamboo@lemm.ee
            link
            fedilink
            arrow-up
            3
            ·
            9 months ago

            Those devices aren’t completely open though. The boards are, but the components they include, namely the processor, are not at all open source.

          • half_built_pyramids@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            9 months ago

            A microchip, even something as simple as an Arduino – which is an atmega 32 – is literally impossible to make in your garage. The machines that make the chips have multi million dollar HVAC just to get the dust out, before they even worry about the hardware.

  • krellor@kbin.social
    link
    fedilink
    arrow-up
    49
    arrow-down
    1
    ·
    9 months ago

    Years and years ago I built my own 16 bit computer from the nand gates up. ALU, etc, all built from scratch. Wrote the assembler, then wrote a compiler for a lightweight object oriented language. Built the OS, network stack, etc. At the end of the day I had a really neat, absolutely useless computer. The knowledge was what I wanted, not a usable computer.

    Building something actually useful, and modern takes so much more work. I could never even make a dent in the hour, max, I have a day outside of work and family. Plus, I worked in technology for 25 years, ended as director of engineering before fully leaving tech behind and taking a leadership position.

    I’ve done so much tech work. I’m ready to spend my down time in nature, and watching birds, and skiing.

  • BestBouclettes@jlai.lu
    link
    fedilink
    arrow-up
    37
    arrow-down
    1
    ·
    9 months ago

    Some people are trying (RISC-V for instance) but as others pointed out it’s really really hard, especially if you want to make the whole computer free and open source.
    First you need an architecture for pretty much all components if you want it to be truly free (how the CPU, ram, motherboard, etc. work, on paper).
    Then you need to manufacture these components, and making a modern CPU is insanely complex, even more so when you have a brand new architecture.
    Then you need software (firmware, drivers, etc.), and again, on a new architecture, stuff will work differently than it does on existing stuff. So people need to learn how to work on your platform to make software. And obviously you need to make it available to people by selling it somehow.
    It’s technically doable but the investment (both monetary and humanly) would be massive and not really something anyone can start on their own as a hobby.

    • Zeon@lemmy.worldOP
      link
      fedilink
      arrow-up
      10
      arrow-down
      2
      ·
      edit-2
      9 months ago

      It’s sad but true. I’m just so baffled as to why? Wouldn’t anyone just be curious to figure out how stuff works? Think of all the brilliant minds out there who are being cut off simply because of corporate greed. Not only that, but they’re deemed as criminals for making it do something it wasn’t intended to do (e.g. Xbox 360 w/ RGH). I just think we’re wasting so much potential to make the world a better place. And we can already see the love behind just using and creating software while following the Free Software philosophy.

      My goal is to help people, maybe you or anyone else might be interested, to get to actually USE their computers, understand how they work, etc.

      The creator of Libreboot, Leah Rowe, and I are making support for the Dell Optiplex 9020 MT. It’s a Haswell motherboard that supports a i7 4790K, 32GB DDR3 RAM, you can also use a 2080 SUPER (or anything else), without the need for any proprietary BIOS firmware (eventually, we still need to reverse engineer 1-2 blobs). It has internal flashing capabilites, so no need to buy flashing equipment, all you need is an insulated screwdriver to short one of the SERVICE_MODE pins, which unlocks the flash chip basically. This allows you to flash the firmware through the OS, which makes it 10x easier for anyone to start using Libreboot. The motherboard you can buy on eBay right now for about $20, or you can buy the whole PC for like $100-$120. Still though, isn’t enough but it will be a step in the right direction.

      • BraveSirZaphod@kbin.social
        link
        fedilink
        arrow-up
        13
        ·
        9 months ago

        It’s more complicated than sheer greed.

        The fact of the matter is that actually producing any modern technology takes a massive amount of work, and up til this point, no one has gathered enough motivation and free time to do it all for any modern hardware just out of pure altruism. There’s a reason why companies have to pay hundreds of engineers a huge amount of money to get anything developed; those people are not going to do this incredibly difficult work just for fun and moral satisfaction. It’s easy to point the finger at corporate greed for some things being locked down, and to be clear, there’s plenty of valid criticism to go around, but it has to be at least considered that most of this stuff would never have been developed in the first place if it wasn’t for those same companies. Your average person is not going to assemble a motherboard from parts and schematics.

        Wouldn’t anyone just be curious to figure out how stuff works?

        To this point, quite frankly, no. Average people simply do not care about this very much. They want to just turn on their magic internet box, get their work done, play their games, consume their media, and move on without any further fuss. The fact of the matter is that most people have no clue what a BIOS is, could not care less if it was proprietary or not, and have zero interest in learning about flashing them or why they would ever want to do that.

      • Valmond@lemmy.mindoki.com
        link
        fedilink
        arrow-up
        8
        ·
        9 months ago

        You can wire up a computer like people did in the eighties. Beep beep boop boop.

        Designing modern cpus is crazy complicated and expensive.

              • SheeEttin@programming.dev
                link
                fedilink
                English
                arrow-up
                1
                arrow-down
                6
                ·
                9 months ago

                Communist China and Soviet Russia would do it.

                They wouldn’t be any good, but they’d do it.

                • pearsaltchocolatebar@discuss.online
                  link
                  fedilink
                  arrow-up
                  7
                  ·
                  9 months ago

                  No. No government would build microchip manufacturing plants in people’s garages.

                  This isn’t a problem caused by capitalism. The machines needed are highly specialized and require extremely tight tolerances. Both of those things require a lot of very expensive equipment to make.

                  You have to remember that we’re talking about billions if not trillions of transistors on a single chip. That’s not something you can just DIY

      • fuckwit_mcbumcrumble@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        9 months ago

        I’m just so baffled as to why?

        Why haven’t you? Same thing applies for everyone else.

        If you had the skill to make an actually useful modern computer you probably work somewhere like that as your job, and you sure as shit don’t want to do that at home too. Especially since you’d probably never make any of your monetary investment back, let alone paying for your time.

        • Zeon@lemmy.worldOP
          link
          fedilink
          arrow-up
          4
          arrow-down
          1
          ·
          9 months ago

          While I understand the challenges you’re pointing out, it’s crucial to acknowledge that not everyone working on personal projects expects immediate financial gains. Some individuals are motivated by a passion for exploration and a desire to contribute to open and accessible technology. Even if replicating a professional-grade computer at home is challenging, there’s value in fostering a community-driven approach to technology, aiming for transparency and independence from corporate interests. The pursuit of knowledge and the potential for positive societal impact can be significant motivators, transcending immediate financial returns.

          • BraveSirZaphod@kbin.social
            link
            fedilink
            arrow-up
            7
            ·
            9 months ago

            It’s not that genuine passion and altruism isn’t acknowledged; the entire open source software world is a testament to that.

            You asked for an explanation as to why Free modern hardware hasn’t been developed yet. The simple answer is that passion and altruism has not yet been a strong enough incentive to motivate anyone to do it. He’s not accusing you of being lazy or hypocritical. The reason why you haven’t done it yet is the exact same reason why anyone else who could do it also hasn’t done it yet. It’s very very hard, and passion doesn’t pay the bills or feed you. Limited to a hobby, it’s simply more work than most people could ever hope to achieve in their spare time.

          • SheeEttin@programming.dev
            link
            fedilink
            English
            arrow-up
            2
            ·
            9 months ago

            Sure. And the number of people who would do it purely because they want to is a tiny fraction of people who do it for pay. To pay those people you need profits, to get profits you need to be special, to be special you can’t share your trade secrets.

        • Zeon@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          arrow-down
          1
          ·
          9 months ago

          I’m sorry if I came off as rude or anything. This issue just frustrates me so much.

  • SkyNTP@lemmy.ml
    link
    fedilink
    arrow-up
    24
    arrow-down
    1
    ·
    9 months ago

    To add to what has already been said about it taking a large effort, the follow up question is then, why don’t governments fund all this effort publicly through taxes, like what is done with roads, scientific research, education, healthcare?

    Well the short answer is that high-performance computing specifically is a strategic resource. Publicly funding roads only benefits the country doing the funding, so that is an easy decision to make. Meanwhile, much of the publicly funded scientific research has minimal to no strategic value (or may only be of value in states capable of that investment in the first place), so this is also an easy decision to make. But giving away technological investments in strategic ressources to rival states is a pretty bad move.

    • SheeEttin@programming.dev
      link
      fedilink
      English
      arrow-up
      10
      ·
      9 months ago

      They absolutely do fund development like this. But they keep it for themselves until such time that it no longer gives them a competitive edge.

      For example, when the US sells tanks or planes to other countries, those export versions have much less fancy equipment on the inside. Or in pure science like cryptography, you can assume that when the NSA publicly approves of an algorithm, they’re confident that they can break it if they really need to (either because they inserted a backdoor, have identified a weakness they can exploit, or just have no use for it any more themselves).

    • Crack0n7uesday@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      9 months ago

      The government might maintain the roads but they don’t pay for your car, and they try not give their enemies tanks.

    • skilltheamps@feddit.de
      link
      fedilink
      arrow-up
      6
      arrow-down
      1
      ·
      9 months ago

      This covers just the basic cpu instructions, no proprietary extensions, no architecture of additional necessities like a gpu, no proprietary firmare for the gpu or anything else. The instruction set of Arm, x86 or whatever is not a secret though. The freedoms in risc-v are mostly concerning the manufacturers, which can build chips using this instruction set without paying any royalties. From a consumer point of view, that at most means one can at most choose from a more organically grown landscape of risc-v chips. Which in turn bears the risk of ending up in a situation, where all we have is a vast jingle of cluttered proprietary extensions, that make it harder to write libre drivers for than it is for Arm today.

      Don’t get me wrong, risc-v is absolutely amazing! But in terms of freedomness, it would take a manufacturer to extend the spirit of open hardware to the complete SOC - and the basic instruction set is pretty much the smallest piece in that.

  • bouh@lemmy.world
    link
    fedilink
    arrow-up
    16
    arrow-down
    1
    ·
    9 months ago

    The technology required to make a modern computer is, to say the least, not easily accessible. There are very few places we’re chips are made. A handful on the planet. I mean in large quantities.

    Otherwise you have laboratories mostly that have the tools to make the chips.

    It is technically possible to make a free computer. But it will be much more expensive and much worse. So why bother?

  • greengnu@slrpnk.net
    link
    fedilink
    English
    arrow-up
    16
    arrow-down
    2
    ·
    9 months ago

    They already did: https://www.commanderx16.com/

    you just probably want something better.

    and that is the problem building higher performance requires more advanced lithography and that is expensive and until recently was not even an option for a hobbyist (without taking a mortgage on their house).

    Given current stagnation, you need only wait about 10 years for that viable option.

    • thejevans@lemmy.ml
      link
      fedilink
      arrow-up
      4
      arrow-down
      1
      ·
      9 months ago

      Came here to link to this. Open hardware computers are a thing, they’re just really pricey.

  • pastermil@sh.itjust.works
    link
    fedilink
    arrow-up
    8
    arrow-down
    1
    ·
    9 months ago

    Would microcontroller count? Arduino Uno got the entire schematics out in the open. Even the core component, the ATMega processor is pretty well documented.

  • Xartle@lemmy.ml
    link
    fedilink
    arrow-up
    4
    ·
    9 months ago

    Investment… It’s a bit too simple to just say money, but investment wraps it up better. Chips may not be open source, but they are physically there to be taken apart and reproduced. That’s what a lot of those Chinese knockoff chips are (baring the ones where the designs are outright stolen). The only thing that stops you from doing the same thing as those bootleg fabs is being willing to soak time and resources into the project. It’s just a big project. Like a Bloomfield i7 (which is old and fairly large) has 731 million transistors in it…

  • Aniki 🌱🌿@lemm.ee
    link
    fedilink
    English
    arrow-up
    2
    ·
    9 months ago

    Traditionally the barrier to enter the hardware market has been absurd but fabrication has come a LONG way and the libre-computer movement is having a hayday right now! Lots and lots of interesting hardware and specifications are coming out. RISC-V is going to be massive once the toolchains, compilers, and binaries are more mature and faster hardware has come out.